19 Common Kenmore Washer Error Codes Explained with Solutions!

In this guide, you will find all information about common Error codes on Kenmore washing machines along with solutions to fix them.

Washing Machine

About Kenmore Company

Kenmore is a manufacturer and marketer of major home appliances in the United States. The company was founded in 1913 and it now sells refrigerators, freezers, ranges, dishwashers, clothes dryers and other common home appliances.

Kenmore

The company has been working on making their appliances more efficient through the use of automatic defrost or the use of ice-makers with fresh water to reduce consumption of electricity.

Kenmore Washers

Kenmore washers are great for those who have a smaller home or apartment. It is a mid-sized capacity washer that packs a powerful punch giving it the ability to clean a full load in just an hour and half. Yet, this washing machine has only one spin cycle and does not have as many settings as some higher end models do.

For example, the Kenmore Elite HE3t is a versatile washer that allows you to wash everything from delicates to comforters, large blankets or pillows. You can even use it for towels, small rugs, baby items or jackets, making this washing machine a great addition to your home. Likewise, there are hundreds of Kenmore washer models with each equipped with is own exclusive benefits.

Kenmore Washer Error Codes

Kenmore washer displays error code on its display screen whenever there is issue with it. Each error code corresponds to different issue and has separate solution. For example, error code “LF” on Kenmore washer means the door of washer is not properly closes and it need to be checked.

Related Kenmore Guide: How to Reset Kenmore Washing Machine

Below are list of Kenmore Washer Error Codes along with their explanations:

Error Code “LF” – Load Size Sensor Error

On Kenmore washer, error code “LF” display screen indicates that load size sensor has failed or the wire connection to load size sensor is loose. Load size sensor is a part of electronic control board and determines the load in washer by measuring drum volume (water). It helps to maintain appropriate amount of water for each load.

To troubleshoot error code “LF” on Kenmore washer, first check the wire connection behind white plastic connector on side of load size sensor. Tighten the connections and check washer for proper load size. If still not working, replace the faulty load size sensor with new one.

Error Code “Ld” – Water Drain Error

The error code “Ld” on Kenmore washing machine display screen indicates that water level in washer is below the minimum threshold limit (Normally 1/4th).

Make sure there is enough water in washing machine and run the drum again. If still not working, check that drain hose of washer is correctly installed and there are no clogs in it. Run the washing machine again and check that washer is draining water properly.

Error Code “Lg” Water Level Sensor Error

On Kenmore washer, error code “Ld” display screen indicates that water level in washer is below the minimum threshold limit (Normally 1/4th).

Make sure there is enough water in washing machine and run the drum again. If still not working, check that drain hose of washer is correctly installed and there are no clogs in it. Run the washing machine again and check that washer is draining water properly.

Error Code “uL” Unbalanced Load Error

On Kenmore washing machine, error code “uL” display screen indicates that load in washer is unbalanced and the machine will not operate until there is proper Water distribution around the drum.

Check if wash load has not been overfilled or overloaded. Make sure that all clothes are evenly distributed inside washing machine drum and run the cycle again.

Error Code “oL” Over-Load Error

Error code “oL” on Kenmore washer display screen indicates that drum of washing machine is overflowing with water.

Check if the load in machine is not too much and there’s enough room for water to circulate around the drum. Repair or replace faulty parts as required.

Error Code “Sd” Suds Detected Error

On Kenmore washer, error code “Sd” display screen indicates that water being used to wash clothes is soapy and suds are developed in machine.

Most of the times it happens because of “Build up” inside pipes which restrict normal flow of water. Clean off build-up with proper pipe cleaning solutions from market and let machine run again.

Error Code “lid” Lid Opened

On Kenmore washer, error code “lid” display screen indicates that lid of washing machine is open during any cycle and it can’t operate with open lid.

Make sure if lid is properly closed or not while running a cycle (Using front load washing machines). If still required replace the lid switch on your Kenmore washing machine.

Error Code “dL” Door Cannot Lock Error

On Kenmore washing machine, error code “dL” display screen indicates that washing machine cannot lock the door during operation.

Make sure if the door is properly closed or not while running a cycle (Using front load washing machines). Replace faulty parts if required.

Error Code “dU” Door Cannot Unlock Error

On Kenmore washer, error code “du” display screen indicates that washing machine cannot unlock the door during operation.

Make sure if the door is properly closed or not while running a cycle (Using front load washing machines). Replace faulty parts if required.

Error Code “PF” Power Failure

Error code “pf” on Kenmore washing machinedisplay screen indicates that there is a power failure or interrupted electricity supply.

Check if your outlet is working properly with other electrical goods and run the load again. If still not running, check for any tripped breakers in house and replace faulty parts as required.

Error Code “FL” Over Fill

On Kenmore washer, error code “fl” display screen indicates that washing machine drum is overfilled and load cannot be run.

Make sure if the load in machine is at least 2/3rd filled with water or fixed limit for your model of Kenmore washer. Replace faulty parts as required.

Error Code “Er” Processor Reset Error

On Kenmore washing machine, error code “er” display screen indicates that processor in washing machine cannot be reset.

Check if the water supply hose is connected to water socket and there’s power getting into outlet. If still not working replace the control board in your washing machine with new one.

Error Code “LF” Long Fill Flashes

On Kenmore washer, error code “lf” display screen indicates that when cycle is running too much time is being taken to fill up the washing machine drum with water.

Make sure if there’s no leakage in supply line or drain hose. Replace any faulty parts as required and run again.

Error Code “wr” Water Pressure Error

On Kenmore washer, error code “wr” display screen indicates that water pressure inside washing machine is low.

Make sure if the inlet hoses and drain hose are properly connected to water source and there’s no leakage or restriction. Replace any faulty parts as required.

Error Code “qL” Quick Cycle Error

On Kenmore washer, error code “qL” display screen indicates that washing machine cannot complete quick cycle in 1 minute.

Make sure if there’s overload inside the washing machine or not. Check if the load can fit in one wash instead of many pieces. Replace any faulty parts as required.

Error Code “ob” Off Balance Error

On Kenmore washer, error code “ob” display screen indicates that load is off balanced.

Make sure if there are too many things inside the washing machine and it’s difficult to balance. Replace any faulty parts as required.

Error Code “ew” Too much Wrinkles Detected Error

On Kenmore washer, error code “ew” display screen indicates that during wash load is taking too much time to get dry.

Make sure if the load inside washing machine is properly spread out or not. Replace any faulty parts as required.

Error Code “ho” High Temperature Error

The error code “ho” on Kenmore washer display screen indicates that temperature of washing machine is too high.

Make sure if there’s any overload inside the drum or not. Check for best wash time setting and replace any faulty parts as required.

Error Code “B1” Incorrect Additives Detected Error

On Kenmore washer, error code “B1” display screen indicates that during wash load additive is improperly mixed in water and wash cycle is not completed.

Make sure if the additive bottle is properly connected or not to detergent and fabric softener dispensers in your washing machine. Replace any faulty parts as required.

Conclusion

If the Kenmore washing machine you have is giving an error code, don’t worry. We’ve compiled a list of some Kenmore washer error codes and their corresponding solutions to help you get it back up and running in no time.

Don’t forget to take your specific model number into consideration when following these steps, as they may vary depending on what type of machine you own. If all else fails or if something seems off with your washing machine, contact one of our experts for assistance!