Having your Samsung dryer not heating up is a thing no one would ever want to experience. Having a cloth dryer at home is somewhat rudimentary because clothes dry up easily through it in summer and winters.
If you notice some malfunctioning in your dryer like it’s not heating, then there are certain steps you need to follow in order to verify the source of the problem.
Samsung has made a high mark in the market due to its quality products. The first reaction that hits your mind when you notice a problem in Samsung dryer is usually of SURPRISE!
But your reaction should be followed by an immediate hunt-plan for the reason that why did it happen like this.
Several issues can prove to be the prime cause of Samsung dryer heating faults. Some of them include:
- Clogged vent
- Thermal fuse out
- Poor thermostat
- Faulty heating functioning
- Broken wires etc.
Causes of Samsung Dryer not Heating Up Issue and Solutions
Some of the malfunctioning reasons and their quick fix up methods are as follows:
#1: Clogged Vents
When you notice that your Samsung dryer is running but not drying the clothes, you need to make sure that the vents are not blocked and the air flows smoothly through them. A better approach is to clean out the vents and press the ON button again.
Mostly, this practice solves the heating issue. If the clogged vents have anything to do with your Samsung dryer not heating up properly, you can also go for the option of Replacement.
Solution: First of all, unplug the back panel of the dryer, remove the connections at once and fix the new one. You can also remove the thermostat to fix up the problem. By replacing the back panel, you can reconnect and have a dryer run for the test.
#2: Thermal Fuse Blown Out
If you find out that overloading your dryer is not the problem, divert your attention to the next possible issue i.e. Blown up thermal fuse.
Thermal fuse basically acts as a protective device that trips in case the dryer is at the brink of overheating. If the thermal fuse blows out and the dryer is not overheating, the fuse is possibly malfunctioning.
Solution: With the help of a multimeter, check out the thermal fuse. If it is fails, remove the back panel. Do a continuity test. If the fuse fails the continuity test, the last option is to replace it.
Overheating serves to be one of the major problems with the Samsung dryer. If you notice that your dryer is overheating, attend to it on time.
If you don’t pay heed to it, you will get to a point where the dryer will completely stop working. In this case, you need to call for proper technical help. You can also wield the DIY steps.
Solution: Fixing method: If you opt for the DIY procedures, check the thermostat whether it is working properly or has a fault in it. If the thermostat is not working properly, Samsung dryer fails to receive ample heat for the quick drying of your clothes. Grab a multimeter and check out the working of thermostat.
You need to be careful when detecting the problem of your Samsung dryer not heating up. The above-mentioned problems are usually reported by the customers. But if you find an exceptional issue, it may be high time to consult with a professional.
After all, a quick and reliable fix is needed!