So, your Fisher and Paykel dishwasher is not draining, and you are worried? Well, there are a variety of reasons why this could be happening.
Chat with your Appliance Repair Specialist.
Click here to live chat with one of our appliance repair technician.
Luckily, this is only a temporary issue in most cases, and I have found several ways to fix it.
Fisher and Paykel Dishwasher Not Draining
If your Fisher and Paykel dishwasher is not draining, mix baking soda and vinegar in one cup and pour the mixture into the standing water at the bottom of the dishwasher. If the water starts draining, rinse it with hot water while running your Fisher and Paykel dishwasher rinse cycle.
In most cases, this will fix the draining problem of your Fisher and Paykel dishwasher. If it does not, try the other troubleshooting methods mentioned below:
Check Garbage Disposer
Ensure that the garbage disposer is properly installed on your Fisher and Paykel dishwasher.
Did you just recently replace the garbage disposer on your dishwasher?
Remember that the new disposer comes with a plug at the drain tube, which is to be removed before use. This is a widespread mistake committed by new dishwasher users.
Clean Air Gap
If you see water coming out of the air gap, it means there is a blockage between the air gap and garbage disposal.
To fix it, you must clean the inside of the air gap with water and baking soda solution.
Check Dishwasher Sump
Check the sump of your Fisher and Paykel dishwasher for any blockage. It is in the bottom of the tub.
If you see any water standing there, it may be due to debris or food particles.
Clean it with baking soda and vinegar solution and see if it opens the drain.
If your Fisher and Paykel dishwasher is not draining, don’t panic, as there are various methods you can follow to fix your dishwasher:
- Correctly install the garbage disposer
- Clean the air gap
- Clean your dishwasher sump
If you still have issues with your Fisher and Paykel dishwasher, contact Fisher and Paykel support or call them at 1-888-936-7872.