Fisher and Paykel Dishwasher Beeping? Here’s an Easy Fix

If Fisher & Paykel DishDrawer Dishwasher beeps 3 times, or beeping continuously, it indicates occurrence of a fault, and in most cases, it should display a fault code in that scenario. Here we will be covering the most common faults that causes the beeping error, along with solutions to fix them.

Why 3 Beeps or Continuous Error Occurs on DishDrawer Dishwashers?

Before we proceed with solution, let’s shed some light of common issues that results in this error. Basically, this depends on from where the beep noises from coming from. If its from the top drawer on your DishDrawer Dishwasher from Fisher and Paykel, and no fault code is displayed, then its probably because of some problems with the PC board.

However, if the beeps is accompanied by some error codes, then that particular error codes will suggest the problem. For example, if the error code is F2, then this refers to problem with the motor.

Similarly, the F3 error codes refers to problem with temperature sensor. We will cover solution for the each of the Fisher and Paykel Dishwasher error codes in details with respective solution in future.

3 Solutions to Fix Fisher and Paykel DishDrawer Dishwasher Beeps Error

Now coming to the subject issue of fixing the beep error, there are multiple methods to fix the aforementioned error of Fisher and Paykel Dishwasher.

Solution # 1: Switch it ON and OFF

Sometimes, the beeping error on Fisher and Paykel DishDrawer Dishwasher is just abnormal, and may be fixed by simply resetting it. To do so, turn it OFF and after 10-15 minutes, turn it ON it. If the problem persists, try the second solution.

Solution # 2: Check for the Key Lock

If you have accidentally or intentionally activated the key lock on your dishwasher and it is still activated, the Fisher and Paykel DishDrawer will continue to beep unless you reactivate it. So check for the key lock and turn it off before getting into operational mode.

Solution # 3: Check for Drain Water

First and foremost, check the hose of your dishwasher. If it is bent or broken, it may not be draining the water which results in activating the beeps. To fix it, if there is bent, you may be able to replace it yourself and if it is broken, you need to replace it with new one.

Let us know which solution worked in your case to fix the beeping error on your Fisher & Paykel DishDrawer. In case you have any question, feel free to reach out to us.