This guide will explain methods to fix Frigidaire refrigerator when it is not cooling or the temperature is performing abnormally.
Method # 01: Vacuum the Compressor
Most of the time, Frigidaire refrigerator stops cooling when there is too much dirt and cleaning it solves the issue. To do so, it is recommended to clean the compressor using vacuum.
If method one does not fix the issue, and you are still having temperature control problem on your Frigidaire refrigerator, then it you should reset its refrigerator. Don’t worry! It is very easy that you can do it yourself.
Steps to Reset Frigidaire Refrigerator Temperature Control
Step 1: First, turn off your refrigerator and disconnect its power cord from the wall outlet. Wait for 5-7 minutes after it is turned off.
Step 2: Now on the main thermostat inside the refrigerator, turn the control to 0. Leave it as it is for 7 minutes.
Step 3: Turn on your fridge and after then adjust the thermostat to desired setting.
Method # 02: Check Start Relay for Defects
The purpose of relay is to star the compressor. It is basically an electromagnet switch, which automatically turns on the compressor when the temperature falls below the set temperature. So if the relay is faulty, the compressor won’t start, which means your refrigerator will not be able to maintain cooling at all.
Since checking and replacing relay on Frigidaire refrigerator involves complicated procedure, we recommend to get it rectified through expert technician.
Method # 03: Check Temperature Control Board
Basically the purpose of temperature control board is provision of sufficient voltage to compressor and the fan motor to maintain desired temperature in the refrigerator. If the control board is malfunctioning, the voltage will not be maintained, which means the compressor of your Frigidaire refrigerator will trip.
So it is highly recommended to get your refrigerator temperature control board checked by Frigidaire authorized technician for defects.