Frigidaire Washer Start Button Not Working? 5 Easy Fixes
You press Start on your Frigidaire washer, but nothing happens? This is very frustrating when the lights are on and the clothes are ready.
Don't worry. Control Lock and the door latch are the first two things I would check because either one can block the Start button.
Try each solution below before you pay for a new panel.
A full size portable washer that gets your laundry moving again while the main machine is out of action. Plugs into any tap, no plumbing needed.
Pros:
- Handles a real 17.8 lb load, not just socks.
- Hooks to a kitchen tap in minutes.
- Keeps laundry going during a repair.
Cons:
- Needs floor space near a sink.
As an Amazon Associate I earn from qualifying purchases.
| ROVSUN 17.8LBS Portable Washing Machine | Check Price |
| Zyro Washing Machine Cleaner Tablet | Check Price |
| Portable Washing Machine, Mini Washer | Check Price |
Why Is the Frigidaire Washer Start Button Not Working?
When a Frigidaire washer Start button does not work, turn off Control Lock, close the door, check the power, reset the washer, and clean the touch panel.
Turn Off Control Lock
If a lock light is on, press and hold the button named Control Lock until the light turns off. The named button can vary by model.
This is one of the common reason the Start button appears not to work.
Close the Door Gently
Move clothing away from the edge and clean detergent from the latch. Close the door gently and listen for the lock.
A loose latch may needs replacement. Do not try to bypass this safety part.
Press Start Correctly
Read the words on the Start button. Keep it pressed until the cycle begins only when it says Hold to Start; otherwise, one press with a dry finger is enough.
These check is worth trying before a reset.
Check Power and Reset
Make sure the plug is fully inserted and check the breaker. Leave the washer unplugged for five minutes before trying the cycle again.
These Frigidaire washer reset steps explain what to do. If this fails, the outside of the panel is the last place you can safely clean.
Clean and Check the Panel
With power off, wipe moisture and detergent from the controls with a soft, dry cloth. Let the panel dry completely.
If only Start stays dead, there is few safe repairs inside the console. Ask a technician to test the button and control.
Conclusion
Try these five fixes when the Frigidaire washer Start button does not work:
- Turn off Control Lock
- Close the door gently
- Press Start correctly
- Check power and reset the washer
- Clean and check the panel
Clears the detergent sludge and limescale that clogs drain pumps and makes a washer smell. Run one before you start pulling the machine apart.
Pros:
- Targets the buildup behind drain faults.
- One tablet a month keeps it clear.
- Works in front and top loaders.
Cons:
- Heavy buildup may need two runs.
As an Amazon Associate I earn from qualifying purchases.
| ROVSUN 17.8LBS Portable Washing Machine | Check Price |
| Zyro Washing Machine Cleaner Tablet | Check Price |
| Portable Washing Machine, Mini Washer | Check Price |
Frigidaire Washing Machine Still Not Working?
Start with what your washing machine is doing. Use our diagnostic tool, answer a few easy questions, and get the solution.
Use Our Frigidaire Washing Machine Troubleshooting ToolWas this page helpful?
Thanks for your feedback!
Written by
Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.