Easy Ways to Stop a Hotpoint Washing Machine from Shaking

Have you noticed that your Hotpoint washing machine is shaking or moving during spin?

I often find that a lopsided load or an unsteady foot can make the whole washer move. I would stop the spin and check the laundry, floor, and leveling feet before you book a repair.

What to Check When a Hotpoint Washing Machine Shakes

I would check the easy causes first. To stop a Hotpoint washing machine shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

Next, if the Hotpoint washing machine is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Inspect the Floor Under the Washer

So, the Hotpoint washing machine needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

However, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washing machine against a wall.

This part around the floor often get forgotten on a Hotpoint washing machine while the washer is empty.

Stop the Cabinet From Rocking

As a safety step, unplug the Hotpoint washing machine and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

Further, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

A small washer foot problem on the Hotpoint often cause a much bigger symptom as you check the simple causes.

Untangle the Laundry

Further, separate tangled clothes and spread heavy items around the Hotpoint drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

Remember, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

The laundry load on your Hotpoint sometimes need only a simple correction before you try a harder repair.

Review the Installation Instructions

Remember, if the Hotpoint washing machine has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

Besides this, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

This installation problem sometimes come and go on a Hotpoint while you look over the machine.

Check the Tub Support Parts

Besides this, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the Hotpoint tub bounce or walk across the floor.

Next, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the Hotpoint washing machine is loud during spin.

Conclusion

These Hotpoint checks move from simple causes of the problem to repairs that need professional help for a steadier machine.

• Inspect the Floor Under the Washer
• Stop the Cabinet From Rocking
• Untangle the Laundry
• Review the Installation Instructions
• Check the Tub Support Parts