Miele Washer Not Filling with Water? Try These 5 Fixes

So, your Miele washer is not filling with water? This is frustrating when you select a cycle and the drum stays dry.

Luckily, you can check the faucets, inlet hoses, and door without opening the washer. I would start there before suspecting the water valve.

Try each solution before calling for service.

Why Is My Miele Washer Not Filling?

Open both faucets and make sure the door locks. If the washer stays dry, inspect the hoses and screens before having the fill valve tested.

Unplug the washer and close both water faucets before removing a hose.

Open Both Faucets

Open both washer faucets all the way. Run a nearby tap as well if the flow seems weaker than usual.

A partly closed faucet are one of the easiest causes to miss.

Make Sure the Door Locks

Move clothes away from the seal, wipe the latch, and close the door gently. The washer may not fill until its door locks.

There may be small item caught around the edge.

Straighten the Inlet Hoses

Make sure neither hose is bent or trapped behind the washer. Replace a hose if it is cracked, swollen, or leaking.

These check also helps prevent a leak later.

Clean the Inlet Screens

With the power and water off, remove the hoses and gently rinse dirt from the small screens. Do not use a sharp tool.

A dirty screen may needs only a gentle clean. When it is already clear, the fill valve should be tested next.

Let a Technician Test the Fill Valve

The inlet valve lets water into the washer. If the supply is good but nothing enters, the valve or control may be faulty.

There is several electrical checks needed, so ask a technician to confirm it before replacing the valve.

Conclusion

For a Miele drum that stays dry, work through these five points:

• Open both faucets
• Make sure the door locks
• Straighten the inlet hoses
• Clean the inlet screens
• Have the fill valve tested

If water enters but stays in the drum, follow our guide for a Miele washer that is not draining.