Zanussi Washing Machine Start Button Not Working? 5 Fixes

Last updated on September 5, 2026 by Muhammad Ali

Is your Zanussi washing machine Start button not working? I know this is annoying when the panel has lights but the wash will not begin.

Don't worry. A lit panel tells you the washer has power, so I would next check the door and Child Lock before blaming Start.

Try these five fixes before paying for a new control panel.

What to Check When a Zanussi Washer Start Button Does Not Work

Check the power and door, turn off Child Lock, press Start correctly, then reset the washer.

Check that the plug is secure and look for a tripped breaker. If the panel is dark, read our guide about a Zanussi washer that is not turning on.

These check tells you if the Start button is receiving power.

Move clothing away from the seal and wipe detergent from the latch. Close the door gently and listen for it to lock.

A faulty latch may needs replacing and must never be bypassed.

Press and hold the button marked Child Lock or Control Lock until the lock light turns off. The named button varies by model.

This is one of the common reason the Start button seems dead.

With a dry finger, press Start once. Keep it pressed until the cycle begins only when the panel clearly says Hold to Start.

If nothing happens, reset the washer before deciding the button is faulty.

Leave the washer disconnected for five minutes, then restore power and try a fresh cycle. Our guide shows how to reset your Zanussi washer.

If only Start still fails, there is few safe repairs inside the panel. Ask a technician to test it.

Try these five fixes when the Zanussi washer Start button does not work:

Start with what your washing machine is doing. Use our diagnostic tool, answer a few easy questions, and get the solution.

Written by

Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.