Did you notice water leaking from the bottom of your Maytag washer? Don’t panic, as in most cases, this is caused by a straightforward issue like a loose drain hose or clogged filter.
This guide will teach you why your Maytag washer is leaking from the bottom and how to troubleshoot it.
Maytag Washer Leaking from the Bottom
The most common reasons your Maytag washer is leaking from the bottom is because of a loose drain hose, a clogged or lose filter, or a damaged drain pump.
Don’t worry. I will explain how to fix these issues and get your Maytag washer back to work. However, before you proceed, here are some words of caution:
If your Maytag load washing machine is under warranty, I recommend contacting Maytag support and asking for advice. Unfortunately, opening your Maytag washer will void its warranty in most cases, so leave it as a last option.
Inspect and Tighten Drain Hose
The drain hose is the first thing to check when you find that your Maytag washer is leaking from the bottom. The drain hose is where the used water is pumped out of the washer.
If your Maytag washer leaks during the wash cycle, then it’s most probably due to the drain hose, which is either damaged or loose.
To check the drain hose, first, disconnect your Maytag loader washing machine from the power source. Then, access the drain hose and make sure it is properly tightened in its place. Also, check it for any clogs or obstructions.
Clean the Drain Pump Filter
Almost all Maytag washers have a drain pump filter. However, over time, the filter gets clogged due to debris build-up and needs to be cleaned.
If you haven’t cleaned your Maytag washer drain pump filter for quite a long time, there is a high chance it’s clogged and causing water leakage.
Level the Washer
If your Maytag washer legs are not levelly placed on the floor, its drum will be unbalanced. Besides causing vibration during the wash cycle, the unbalanced drum will also cause water leakage.
Check to make sure that your Maytag washer feet are level. If you are not sure how to do that, call a specialist technician.
Check the Coin Tap
Coin tap is one of the most overlooked parts of any washer. However, it may be the main culprit if your Maytag washer is quite old and you haven’t recently cleaned the coin tap.
The coin trap prevents foreign objects from getting into the drain. So, it needs to be regularly checked and cleaned; otherwise, it can cause water leakage.
A faulty or clogged drain pump can also cause water to leak from the Maytag washing machine. As its name suggests, the drain pump is the central part responsible for draining the water from the washer.
If your Maytag washing machine is under warranty, then you can get the drain pump replaced for free. However, if its warranty period is over, you will have to contact a repair technician to inspect and fix it for you.
When your Maytag washer is leaking, try the following solutions to fix it:
- Inspect and tigethen the drain hose
- Clean the drain pump filter
- Level the washer
- Check and clean the coin tap
- Inspect the drain pump and replace if faulty