Fisher & Paykel Washer Shaking and Moving? Try these FIXES!

Is your Fisher and Paykel washer shaking or moving during spin?

I would suggest starting with the checks you can do safely. I think you should stop the spin and check the laundry, floor, and leveling feet, because a lopsided load or an unsteady foot can make the whole washer move.

How to Keep a Fisher and Paykel Washer Steady

This is what I would check. To stop a Fisher and Paykel washer shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

Before moving on, if the Fisher and Paykel washer is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Check What Changed During Installation

For this check, if the Fisher and Paykel washer has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

As you work, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

A small installation problem on the Fisher and Paykel often cause a much bigger symptom while you look over the machine.

Tighten Loose Leveling Feet

Before going further, unplug the Fisher and Paykel washer and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

Next, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

The washer foot on your Fisher and Paykel sometimes need only a simple correction as you inspect it.

Remove Soft Mats Under the Washer

Remember, the Fisher and Paykel washer needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

Besides this, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washer against a wall.

This floor problem sometimes come and go on a Fisher and Paykel during your first check.

Check the Amount of Laundry

Next, separate tangled clothes and spread heavy items around the Fisher and Paykel drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

For this check, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

This part around the laundry load often get forgotten on a Fisher and Paykel washer while you look for the cause.

Stop a Washer That Keeps Walking

As you work, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the Fisher and Paykel tub bounce or walk across the floor.

Before moving on, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the Fisher and Paykel washer is loud during spin.

Conclusion

Work through the Fisher and Paykel checks in the order that matches what you see, aiming for a steadier machine.

• Check What Changed During Installation
• Tighten Loose Leveling Feet
• Remove Soft Mats Under the Washer
• Check the Amount of Laundry
• Stop a Washer That Keeps Walking