GE Washer Shaking and Moving? Try these FIXES!

Have you noticed that your GE washer is shaking or moving during spin?

I often find that a lopsided load or an unsteady foot can make the whole washer move. I would stop the spin and check the laundry, floor, and leveling feet before thinking about a major repair.

Simple Checks for a Shaking GE Washer

In most cases, to stop a GE washer shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

So, if the GE washer is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Avoid One Heavy Item

In many cases, separate tangled clothes and spread heavy items around the GE drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

At this point, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

These laundry load is also worth your attention before the next test.

Arrange Service for a Bouncing Drum

Also, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the GE tub bounce or walk across the floor.

So, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the GE washer is loud during spin.

The simple signs around this suspension is easy to miss while the washer is empty.

Make Sure Every Foot Is Firm

To stay safe, unplug the GE washer and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

In many cases, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

The GE may gives you a useful clue around this washer foot as you check the simple causes.

Make Sure the Floor Does Not Flex

As you work, the GE washer needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

Before moving on, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washer against a wall.

There is usually a few clues around the GE floor before you try a harder repair.

Inspect the Setup After a Move

At this point, if the GE washer has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

Also, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

Conclusion

Use what the GE washer is doing to choose the most useful check and get a steadier machine.

• Avoid One Heavy Item
• Arrange Service for a Bouncing Drum
• Make Sure Every Foot Is Firm
• Make Sure the Floor Does Not Flex
• Inspect the Setup After a Move