Samsung Washer Shaking and Moving? Try these FIXES!

Is your Samsung washer shaking or moving during spin?

I often find the cause is simpler than it first appears. I would suggest you stop the spin and check the laundry, floor, and leveling feet, because a lopsided load or an unsteady foot can make the whole washer move.

Why Is My Samsung Washer Moving During Spin?

Here's the short answer: to stop a Samsung washer shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

At this point, if the Samsung washer is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Move the Washer Onto a Firm Surface

Next, the Samsung washer needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

For this check, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washer against a wall.

One of these floor check can reveal what changed as you check the simple causes.

Balance and Reduce the Load

As you work, separate tangled clothes and spread heavy items around the Samsung drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

Before moving on, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

The laundry load on your Samsung often show a useful clue before you try a harder repair.

Remove Only the Listed Shipping Parts

Before moving on, if the Samsung washer has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

In many cases, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

A few minute spent on the Samsung installation can be useful while you look over the machine.

Adjust the Washer Feet

Remember, unplug the Samsung washer and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

As you work, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

On a Samsung washer, this washer foot are easy to overlook as you inspect it.

Ask for Help With Violent Shaking

In many cases, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the Samsung tub bounce or walk across the floor.

At this point, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the Samsung washer is loud during spin.

Conclusion

Try the safe Samsung checks first for a steadier machine, then leave internal repairs to a technician.

• Move the Washer Onto a Firm Surface
• Balance and Reduce the Load
• Remove Only the Listed Shipping Parts
• Adjust the Washer Feet
• Ask for Help With Violent Shaking