Easy Ways to Stop a Whirlpool Washer from Shaking and Moving

Is your Whirlpool washer still shaking or moving during spin?

I know watching the cabinet move and pull at its hoses is worrying. I would begin by asking you to stop the spin and check the laundry, floor, and leveling feet, since a lopsided load or an unsteady foot can make the whole washer move.

How to Stop a Whirlpool Washer From Shaking

To stop a Whirlpool washer shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

In many cases, if the Whirlpool washer is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Have the Suspension Inspected

Before moving on, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the Whirlpool tub bounce or walk across the floor.

In many cases, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the Whirlpool washer is loud during spin.

There is usually a few clues around the Whirlpool suspension as you compare each result.

Check the Floor First

Besides this, the Whirlpool washer needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

Next, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washer against a wall.

These floor is also worth your attention while you work through the list.

Spread Out Heavy Clothes

For this check, separate tangled clothes and spread heavy items around the Whirlpool drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

As you work, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

The simple signs around this laundry load is easy to miss during a careful check.

Level All Four Feet

For safety, unplug the Whirlpool washer and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

For this check, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

The Whirlpool may gives you a useful clue around this washer foot before the next test.

Check a Recent Installation

As you work, if the Whirlpool washer has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

Before moving on, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

Conclusion

The simple checks above should help you get a steadier machine or decide whether the Whirlpool needs service.

• Have the Suspension Inspected
• Check the Floor First
• Spread Out Heavy Clothes
• Level All Four Feet
• Check a Recent Installation