Water Standing in Whirlpool dishwasher under Filter Area (Try this FIX)

Did you notice standing water at the bottom of your Whirlpool dishwasher under the filter area?

Luckily, a straightforward fix should resolve 90% or so of Whirlpool dishwasher standing water issues.

Also Check: Fix Whirlpool Dishwasher not Spraying Water

Whirlpool dishwasher Standing Water under Filter Area

You need to check its drain system if you see water standing in your Whirlpool dishwasher under the filter area. If the drain is clogged with debris or food particles, clean it with a wire hanger. Also, ensure that the sump area of your dishwasher is not blocked.

If this does not resolve the issue, try the additional fixes detailed below:

Check the Supply Line

There is also the possibility that the supply line has a blockage, which is preventing the water from draining.

Remove it from your dishwasher and circulate pressurized water through it to remove any debris from it.

It is also recommended to pour baking soda and vinegar solution through it and then pass hot water.

Check your dishwasher Filter

On Whirlpool dishwashers, the filter is usually located at the bottom. If you are unsure how to access it, refer to your dishwasher’s manual.

Remove the filter and clean it with compressed air or water.

Check Drain Hose

Make sure that the drain hose is straight. Over time, it develops bends, which creates blockages and prevents the water from draining.

If you see any kind of bend, carefully straighten the hose.

Check the Garbage Disposer

Ensure that the garbage disposer is properly installed on your Whirlpool dishwasher.

Did you just recently replace the garbage disposer on your dishwasher?

Remember that the new disposer comes with a plug at the drain tube, which is to be removed before use. Unfortunately, this is a widespread mistake committed by new dishwasher users.

Conclusion

If water is standing at the filter area of your Whirlpool dishwasher, don’t panic, and try the following troubleshooting methods to fix it:

  • Clean the supply line
  • Clean your dishwasher filter
  • Check the drain hose
  • Check the garbage disposer

If you still have issues with your Whirlpool dishwasher, contact Whirlpool support at +1-866-698-2538. They are available Monday to Friday from 8 AM to 6 PM EST.

Was this page helpful?

Leave a Comment