Bosch Dishwasher Error Code E24 – Causes and Solutions

The E24 error code on the Bosch dishwasher is an indication of an issue with the water drain, mainly due to clogging. But, just like e09, this error code can be fixed easily at home, here’s how.


Main Causes E24 Error Code

According to Bosch, when there is any issue with the drain hose, error code E24 will appear. Apart from the drain issue, the error code E24 does not relate to any other problem with your Bosch dishwasher.

So a sigh of relief!

The drain hose issues include:

  • Bent in hose
  • Clogging in hose pipe due to debris
  • Problem with concerned sensor

How does this appears code appears?

Normally, the E24 error code appears for 1-2 minutes when you turn to start the washing, and afterward it goes away.

Please note that the E24 error code is totally different from the water tap error, which is usually represented by error code E25.

Also Check: Fix Bosch Dishwasher Beeping Error

Solutions to Fix Error Code E24 on Bosch Dishwashers

Method # 01: Check the Drain Pump

Check out the drain pump on your dishwasher and check if the valves are in place. If they are not, check for their replacement or repair.

Another check for the drain pump is to see if it is getting the right power. For that, hear the sound when you press the cancel button. If you do not hear any sound, then it means the pump is not getting the right power.

If there is no problem with the drain pump and you are still getting the E24 error code on your Bosch dishwasher, look for the second method.

Method # 02: Clean Up your Dishwasher

To clean up your Bosch dishwasher, follow the steps below:

  1. Properly disconnect your dishwasher from the electric supply.
  2. Remove the dishwasher from its cabinet.
  3. Open the main control at the bottom right side after removing the sealing.
  4. In the main control, you will see about six wires.
  5. Check the container inside which will have tubes.
  6. Look at these tubes for any debris and clean them up.
  7. After all the cleaning of pipes, connect them to their place and fix the dishwasher in its cabinet.

That is all required to get rid of the e24 error code on Bosch dishwashers.