Fisher and Paykel Washer Not Turning On? Do THESE Steps

So, your Fisher and Paykel washer is not turning on? Don’t panic. This guide will teach you various DIY solutions to fix your Fisher and Paykel washing machine that won’t turn on.

Fisher and Paykel Washing Machine Not Turning On

Here’s how to fix your Fisher and Paykel washer when it doesn’t turn on: First, ensure that your washer is getting the power. Also, inspect the associated socket breaker. If this does not help, the washer timer or control board might have gone bad and need replacement.

Don’t worry. I will explain the above solutions in detail. However, here are some words of caution:

If your Fisher and Paykel washer is under warranty, I recommend contacting Fisher and Paykel support and asking for advice. Unfortunately, opening your Fisher and Paykel washer will void its warranty in most cases, so leave it as a last option.

Check the Power Source

Washer Power Source

First, check if your Fisher and Paykel washer is getting power or not. Next, ensure that the washer plug is securely attached to the power socket and there are no signs of burnt or damage.

Also, check your house breaker box and see if the breaker linked to the washing machine socket is tripped or not. If it is tripped, then perhaps, it was due to over-current.

I’d recommend inspecting the root cause of the breaker tripping before flipping it On.

Check Timer

Washer Timer

If your Fisher and Paykel washing machine is automatic or semi-automatic, its functions depend on the timer. The timer may be displaced due to normal wear and tear if your Fisher and Paykel washer is old.

If the timer on your Fisher and Paykel washer is faulty or displaced, it will prevent it from turning on.

Testing and replacing the washing machine timer is not something I’d recommend doing yourself, so always seek professional help.

Faulty Control Board

Washer Control Board

As its name suggests, the control board is the brain of electronic washers. If your Fisher and Paykel washing machine control board malfunctions, it will not even receive power.

The control board is inside the washing machine, so you must disconnect your Fisher and Paykel washer from the power source before accessing it.

If your Fisher and Paykel washer is under warranty, do not attempt to inspect or replace the control board yourself, as it will void its warranty.

Conclusion

When your Fisher and Paykel washing machine is not turning on, try the following solutions to fix it:

  • Check the power source
  • Check your washing machine timer
  • Check the washer control board
Was this page helpful?

Leave a Comment